Products - Ensapsultated transformers    Products - HR equivalents

Short-circuit proof

E2006

EE 20/6

Short-circuit proof

0.35 VA - 70ºC/B

Logo CE

Simple primary

Simple secondary


E2006

Weight/unit:

29 gr

E2006

Weight/minibox (Units: 5)

145 gr

E2006

Weight/bigbox (Units: 240)

6960 gr

HR Ref. Primary Sec. Sec. In

Vo

(In=0)

Sec. Prot.
P1 P2 S1 S2 Is1 Is2 CC (*)
E2006164 115 V - 4.5 V - 78.0 mA - 7.6 V CC
E2006150 115 V - 6.0 V - 58.0 mA - 10.2 V CC
E2006152 115 V - 7.5 V - 47.0 mA - 12.7 V CC
E2006154 115 V - 9.0 V - 39.0 mA - 15.3 V CC
E2006156 115 V - 12.0 V - 29.0 mA - 20.4 V CC
E2006158 115 V - 15.0 V - 23.0 mA - 25.5 V CC
E2006160 115 V - 18.0 V - 19.0 mA - 30.6 V CC
E2006162 115 V - 24.0 V - 15.0 mA - 40.8 V CC

(*) CC means short-circuit proof

E2006

Technical characteristics:

  • Designed and manufactured according regulations EN61558 EN60590 EN60472 UL506 UL1585
  • Two-chamber coil
  • Vacuum sealed
  • Safety transformer class II / Protection index IP00 (For all models with no load voltage lower than 50V according to EN61558, and to 30V according to UL1585)
  • Short-circuit-protected
  • Self-extinguishing plastic UL94-VO
  • Epoxy resin class F
  • Isolation: Prim./Sec. = 10 MOhm to 500 Vcc - Sec./Sec. = 2 MOhm to 500 Vcc
  • Dielectric strength Prim. / Sec. = 5 kV / 1min.
  • Secondary voltage tolerances 5%
  • Test at 100% of all electrical parameters in production
  • Reliability tests for production batch (life term)
  • Certificates of production test results (under request)
  • Certifications VDE, UL; others certifications under request: CSA, SEMKO